Buyer's Guide
Use this Buyer’s Guide to start with the main system decision first: which USA TrackBusway® system fits your project.
Begin with 40A Track Busway or 225A Track Busway, then move to FEEDs and POWER Plug-Ins to complete your overhead power layout.
Choose Your Track Busway System
40A Track Busway
Modular busway lengths and all components needed to build a continuous RUN (lengths, mechanical joiners, electrical joiner inserts, hangers, cable kits, closure strip).
LENGTHs
Hanging
Joining
FEEDs
Modules that bring power from your panel into the busway (Single-Phase or Three-Phase).
-
1
-
2
-
3
-
4
225A Track Busway System
225A Track Busway is the higher-capacity USA TrackBusway system for heavier overhead power distribution applications.
This section includes the main 225A run components used to build the busway path: lengths, joiners, suspension hangers, and power feed units.
40A POWER Plug-Ins
Deliver power anywhere along the busway—no rewiring required.
120V 1-Pole Power Tap-Off Units
1-pole tap-off units deliver 120V line-to-neutral power from the 40A Track Busway system. Use these for standard receptacles, cord drops, outlet boxes, and light-duty equipment connections.
-
1
-
2
-
3
-
4
208Y / 240V 2-Pole Power Tap-Off Units
2-pole tap-off units draw power line-to-line for 208V or 240V loads. Use these for equipment that requires higher single-phase voltage from the overhead Track Busway run.
-
1
-
2
-
3
-
4
-
5
-
6
3-Phase Power Tap-Off Units
3-pole tap-off units provide three-phase power from double-deck Track Busway runs. Use these for motors, machinery, and equipment that requires balanced three-phase power overhead.
225A / T225 POWER Tap-Off Units
T225 POWER Tap-Off Units deliver localized 120V, 208V, 240V, 480V, or three-phase power from the 225A Track Busway system, allowing equipment connections to be positioned where the layout requires them.
T225 1-Pole Power Tap Off Units
T225 1-pole tap-off units provide 120V line-to-neutral power from the 225A Track Busway system. These units support higher-capacity projects while still allowing localized plug-in access along the run.
T225 2-Pole Power Tap Off Units
T225 2-pole tap-off units provide 208V, 240V, or 480V line-to-line power from the 225A Track Busway system. Use these for heavier single-phase equipment loads that need power positioned overhead.
T225 3-Pole Power Tap Off Units
T225 3-pole tap-off units provide three-phase power from the 225A Track Busway system. These are intended for higher-capacity equipment, machinery, and project layouts that require three-phase distribution along the run.
