Laboratory Overhead Power Distribution
Laboratories, research spaces, testing facilities, and makerspaces need electrical infrastructure that can adapt as benches, instruments, and workflows change. USA TrackBusway provides overhead, plug-in power distribution that keeps power accessible above the workspace instead of locked into walls, floors, or fixed conduit runs. Power drops, outlet boxes, lighting, and data attachments can be planned above work areas and repositioned as laboratory layouts evolve.
Flexible Laboratory Power Infrastructure
Laboratories are no longer static spaces. Research programs change, benches move, instruments are added, and workflows evolve over time. When power is tied to fixed wall outlets, floor boxes, or conduit runs, the electrical infrastructure can limit how the lab adapts.
USA TrackBusway moves plug-in power overhead so electrical access can stay aligned with the workspace. This supports laboratory planning that is flexible from day one and easier to adjust over the life of the facility.
Laboratory Power Infrastructure
Track Busway delivers overhead, plug-in power that allows benches, equipment, and/or lighting to be repositioned quickly—without rewiring or downtime.
Match Power to the Laboratory Application
Different laboratory areas often require different electrical configurations. General bench instruments may use 120V single-phase power, while specialized equipment may require 208V, 240V, or three-phase power. Instead of overbuilding every bench location for peak theoretical demand, Track Busway allows power to be distributed along the run and delivered where each workstation or equipment zone actually needs it.
General Bench Power
Typical need: 120V single-phase receptacles
Track Busway solution: 1-pole plug-in power drops or outlet boxes
Specialized Instruments
Typical need: 208V or 240V line-to-line power
Track Busway solution: 2-pole plug-in power drops or outlet boxes
Larger Equipment / Process Loads
Typical need: Three-phase power
Track Busway solution: Three-phase Track Busway with 3-pole / 4-wire plug-in options
Lighting and Data Support
Typical need: Overhead task lighting, data drops, and organized cable routing
Track Busway solution: Lighting plug-ins, data attachments, and cable-management options where applicable
Power Distribution and Lighting Solutions
Laboratory & Makerspaces
Track Busway is designed for laboratory and makerspace environments where equipment layouts change frequently. By suspending plug-in power overhead, laboratories can reposition benches, tools, and test equipment without cutting into walls, floors, or ceilings. Power is delivered precisely where it’s needed while keeping floors clear and infrastructure organized.
Plug-In Power Drops for Laboratory Work Areas
USA TrackBusway provides continuous overhead access for plug-in power drops and outlet boxes. Drops can be positioned above benches, instruments, test equipment, or future work zones, helping reduce cord clutter and keeping power accessible where the work is happening.
Laboratory systems may be configured for 120V, 208V, 240V, or three-phase power depending on the equipment, approved system design, and project requirements.
Laboratory Workstations and Bench Power
Laboratory benches and workstations often support changing equipment, users, and workflows. Track Busway allows power drops to be positioned directly above benches so power can remain accessible even as the bench layout changes. This helps laboratories avoid being locked into fixed outlet locations or floor-level power points.
R&D, Testing, and Prototyping Labs
Research, development, testing, and prototyping spaces often change faster than the building infrastructure around them. Track Busway creates an overhead framework for plug-in power so equipment zones can be adjusted, expanded, or reorganized without full conduit rework.
Makerspaces and Shared Lab Environments
Makerspaces and shared laboratory environments benefit from power that can adapt as projects, tools, and users change. Track Busway supports flexible access to power across multiple work areas, helping teams support temporary setups, rotating equipment, and collaborative experimentation.
Power, Data, and Lighting Above the Workspace
Laboratory infrastructure is not limited to receptacles. Track Busway can help organize power, lighting, and data support above the workspace, reducing floor-level clutter and keeping utilities closer to benches, equipment, and work zones.
ETL Listed to UL 857 Busway Standards
USA TrackBusway is ETL listed to UL 857 busway standards for use as a busway system. Laboratory projects should be designed and installed by qualified electrical professionals in accordance with applicable codes, project requirements, and final approved drawings.
Laboratory Design Resources
Designing Flexible Laboratories with Overhead Power Distribution
External article on flexible lab design using overhead power systems.
Read ArticleComplimentary Design Drawings
Request layout drawings tailored to your laboratory configuration.
Request Layout SupportLaboratory Track Busway FAQs
Track Busway keeps plug-in power overhead so electrical access can stay aligned with benches, instruments, and work zones as laboratory layouts change. This helps reduce dependence on fixed wall outlets, floor boxes, and conduit runs.
Yes. Depending on the system configuration, Track Busway can support standard 120V single-phase receptacles as well as 208V, 240V, and three-phase plug-in options for higher-power equipment.
After the system is installed, plug-in power drops and outlet boxes can be repositioned along the run as work areas change. This helps reduce the need for new conduit runs or fixed outlet relocation when benches or equipment are moved.
Yes. USA TrackBusway is ETL listed to UL 857 busway standards. Final system design and installation should follow applicable codes, project requirements, and approved drawings.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
