T225 · 225A Track Busway system

T225 3-Pole Breakered Drop Cord Tap Off Unit

Skip to product information
1 of 3

T225 Tap-Off Installation & Repositioning

Watch a T225 tap-off connect to the busway and move along the run. This excerpt applies to T225 outlet-box and PowerDrop assemblies.

This 3-pole PowerDrop cord tap-off plugs into the 225A (T225) Track Busway system and brings the connection to equipment below the overhead run. It supplies protected three-phase power for compatible 208V or 480V equipment, with receptacle and branch-circuit ratings determined by the selected configuration.

For 225A Track Busway (225A per feed). T225 identifies the compatible busway system, not this tap-off’s amperage. Select the tap-off’s own current rating, voltage, pole count and protection from its specifications.

Typical T225 lead time: 8 weeks

Planning estimate. Your quote confirms the tap-off shipment schedule.

Build your tap-off

Match the starting build to your equipment. Choose factory orientation before ordering. Price, specifications and downloads follow your selection.

Factory-set and NOT field-rotatable. Choose the required orientation before ordering.

Options vary by power, electrical and build combination.

Optional critical power monitoring: Selected T225 tap-off units can incorporate critical power monitoring. Monitored configurations and their configuration-specific cut sheets are available on request. Explore power monitoring or contact USA TrackBusway for configuration details.

Loading your selected build, specifications and downloads.

Catalogue # (SKU): PT225-C-10-DCXX-L1630C-G-T

$825.00 USD

Documents for your selected tap-off

Downloads follow your selected build. Revit downloads are representative family models; confirm the selected configuration.

PT225 is the current tap-off SKU prefix. Older T225 tap-off references use the same remaining code.

Browse configuration data sheets

Open another configuration sheet without changing your selected build.

More technical resources →

Listed to UL 857 Busway Standards

For covered PT225 configurations. View listing scope and selected-build ratings.

Intertek Control No. 5011082
Report No. 106508638CRT-001

View T225 listing scope and ratings →

Where should a 3-pole PowerDrop be positioned?

Place the drop near the equipment connection and measure the full cord route, including the distance down from the busway and across to the machine or workstation. Account for access panels, service aisles and equipment movement so the connector can be reached without routing the cord through the work area.

T225 breakered tap-offs available up to 100A

Existing 60A and lower-current offerings remain available. The 50A and 100A additions below each include one circuit breaker and one female output device, standard equipment ground and no monitoring. Availability depends on the specific supply and connection; every connection is not offered at every amperage.

New 50A/100A PowerDrops include 12 feet of cord. Other lengths are available by quotation. DCXX is the stable base SKU field; DC12 identifies the included 12-foot cord in the completed catalogue number. Other cord lengths require a quotation.

Tap-off rating / supply Output device / matching equipment plug Breaker Configuration sheet
50A — 208V, 3-phase HBL460C9W / HBL460P9W BGL36050; 3 pole 50A PowerDrop — HBL460C9W (PDF, 1 page)
50A — 208Y/120V, 3-phase HBL560C9W / HBL560P9W BGL36050; 3 pole 50A PowerDrop — HBL560C9W (PDF, 1 page)
50A — 480V, 3-phase HBL460C7W / HBL460P7W BGL36050; 3 pole 50A PowerDrop — HBL460C7W (PDF, 1 page)
50A — 480Y/277V, 3-phase HBL560C7W / HBL560P7W BGL36050; 3 pole 50A PowerDrop — HBL560C7W (PDF, 1 page)
100A — 208V, 3-phase HBL4100C9W / HBL4100P9W BGL36100; 3 pole 100A PowerDrop — HBL4100C9W (PDF, 1 page)
100A — 208Y/120V, 3-phase HBL5100C9W / HBL5100P9W BGL36100; 3 pole 100A PowerDrop — HBL5100C9W (PDF, 1 page)
100A — 480V, 3-phase HBL4100C7W / HBL4100P7W BGL36100; 3 pole 100A PowerDrop — HBL4100C7W (PDF, 1 page)
100A — 480Y/277V, 3-phase HBL5100C7W / HBL5100P7W BGL36100; 3 pole 100A PowerDrop — HBL5100C7W (PDF, 1 page)

Download the complete 3-pole PowerDrop family selector (PDF) — family summary, linked selection tables and individual configuration sheets.

Download the complete 3-pole PowerDrop family guide (PDF)

The equipment-side plug must match the selected output and is supplied with the equipment. Select the applicable phase assignment and final -T/-R factory orientation. -T places the breaker on the same side as the conductors/insulator; -R places it on the opposite side. Factory-set. Not field-rotatable.

Made to order. Applicable ETL identification and assembly ratings follow the factory unit label. Listed to UL 857 Busway Standards. No new fused, GFCI, isolated-ground, monitored or multiple-output builds are included.

View full details